Name: NVT Phybridge NV-216A-PV Passive Power / Video Transceiver
Brand: NVT Phybridge
SKU: NV-216A-PV

NVT Phybridge NV-216A-PV Passive Power / Video Transceiver

Marcas: NVT Phybridge

N.º ADI #:NV-216A-PV modelo #: NV-216A-PV Nombre: NVT Phybridge NV-216A-PV Passive Power / Video Transceiver

Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub
Up to 3,000 feet (1,000 m) with a DigitalEQTM Hub or active receiver
Up to 1,500 feet (460m) shall be supported by any NVT StubEQTM Hub

Descripción del producto

General Información

The NV-216A-PV from NVT is a Power-Video Transceiver that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire and supports any type of Baseband Signals. The NV-216A-PV from NVT allows incorporates the transceiver engine of NVT‘s popular NV-214A-M video transceiver with the added value of camera power connections and also Connect the RJ45 to 4-pair cable to be routed to the NVT cable integrator and on to an active or passive receiver hub in the MDF/Control Room. The NV-216A-PV allows transmission of CCTV video and low voltage power over UTP cable and has a compact body.

Features

Power-Video (PV) signals are routed via UTP and RJ45
Use with NVT's PVDTM
Power Supply Hubs and Cable Integrators, or with a second NV-216A-PV
Up to 750ft (225m) with a NVT Passive Hub or Transceiver
Up to1,500ft (460m) with a NVT StubEQTM Hub
Up to 3,000ft (1km) with a NVT DigitalEQTM Hub or active receiver, (see Power Distance Chart)
Frequency response DC to 10MHz (see Resolution Distance Chart)
Supports “up-the-coax� type control signal up to 750ft (225m)
Exceptional interference rejection
Built-in transient protection

Características principales